VE
Vinylester based two-component bonded anchoring system for stress-free fixing into solid and hollow substrates. VE resin produces higher bond strength than polyester and is suitable for more demanding applications. VE is ideal for applications such as hand railings, fences, posts and signs, air conditioning and ventilation systems or public furniture. The resin is CE Marked and has an Option 7 European Technical Assessment for anchoring into uncracked concrete.
VE is available in CiC (foil pack), C-CN (co-axial) and S-SN (side-by-side) cartridges.
Approvals
- ETA according to EAD 330499-00-0601 (Option 7: Uncracked Concrete)
- A+ French VOC (Emissions Class)
Approval Information
Features
- Anchors may be placed close to free edges.
- Non-sag formulation, ideal for overhead applications without specific accessories
- Suitable for dry, wet & flooded holes without loss of performance
- Reduced drilling diameters i.e. M20 only requires a 22mm hole and M24 requires only a 26mm hole making it an economical injection system
- Variable embedment depths
- Available in co-axial cartridges (380; 400; 410ml), side by side cartridges (345; 360; 825ml), and single piston foil pack cartridges (150; 165; 170; 300; 550; 850ml)
- Available in grey and stone resulting colours
Typical Applications
- Catenary Support
- Masonry Supports
- Machinery
- Canopies
- Brackets
- Hand Rails
- Ventilated Façades
Cartridge Systems
VE is available in CiC (foil pack), C-CN (co-axial) and S-SN (side-by-side) cartridges.
CIC 300ml
Size selected: 300ml
CiC (capsule in cartridge) system, invented and patented by 2K in late 1990’s, is one of the most popular dispensing systems in the world. It allows us to fill your two component products in a single-chamber cartridge, which can be used with the industry-standard single-component applicator tools.
Other sizes:
170ml, 300ml, 550ml, 850ml
Applicator:
May be used with standard mastic guns.
Back
Co-Axial 380ml
Size selected: 380ml
The Co-Axial cartridge system is available in 10:1 ratio and volumes of up to 410ml. It has two vertical round chambers: the outer (also known as “doughnut”) chamber contains Part “A” and the inner chamber contains part “B”. The system requires a dedicated applicator tool that is capable of pushing pistons of both chambers at the same time.
Other sizes:
150ml, 380ml, 410ml
Applicator:
Requires dedicated dispensing tool is required for the 380ml cartridge.
Back
Co-Axial 410ml
Size selected: 410ml
The Co-Axial cartridge system is available in 10:1 ratio and volumes of up to 410ml. It has two vertical round chambers: the outer (also known as “doughnut”) chamber contains Part “A” and the inner chamber contains part “B”. The system requires a dedicated applicator tool that is capable of pushing pistons of both chambers at the same time.
Other sizes:
150ml, 380ml, 410ml
Applicator:
Requires dedicated dispensing tool is required for the 410ml cartridge.
Back
Side-By-Side 345ml
Size selected: 345ml
The S-SN cartridges are available in 1:1, 2:1, 3:1 and 10:1 ratios and volumes of up to 1500ml. Chambers of each component are positioned externally and next to each other, requiring dedicated applicator tool for each cartridge size.
Other sizes:
345ml, 385ml, 400ml, 450ml, 585ml, 600ml, 825ml, 900ml, 1500ml
Applicator:
The 345ml cartridge sizes require dedicated dispensing tools.
Back
CIC 150ml
Size selected: 150ml
CiC (capsule in cartridge) system, invented and patented by 2K in late 1990’s, is one of the most popular dispensing systems in the world. It allows us to fill your two component products in a single-chamber cartridge, which can be used with the industry-standard single-component applicator tools.
Other sizes:
150ml, 170ml, 300ml, 550ml, 850ml
Applicator:
May be used with standard mastic guns.
Back
CIC 170ml
Size selected: 170ml
CiC (capsule in cartridge) system, invented and patented by 2K in late 1990’s, is one of the most popular dispensing systems in the world. It allows us to fill your two component products in a single-chamber cartridge, which can be used with the industry-standard single-component applicator tools.
Other sizes:
150ml, 170ml, 300ml, 550ml, 850ml
Applicator:
May be used with standard mastic guns.
Back
CIC 550ml
Size selected: 550ml
CiC (capsule in cartridge) system, invented and patented by 2K in late 1990’s, is one of the most popular dispensing systems in the world. It allows us to fill your two component products in a single-chamber cartridge, which can be used with the industry-standard single-component applicator tools.
Other sizes:
170ml, 300ml, 550ml, 850ml
Applicator:
May be used with standard mastic guns.
Back
CIC 850ml
Size selected: 850ml
CiC (capsule in cartridge) system, invented and patented by 2K in late 1990’s, is one of the most popular dispensing systems in the world. It allows us to fill your two component products in a single chamber cartridge, which can be used with the industry-standard single-component applicator tools.
Other sizes:
170ml, 300ml, 550ml, 850ml
Applicator:
May be used with standard mastic guns.
Back
Co-Axial 150ml
Size selected: 150ml
The Co-Axial cartridge system is available in 10:1 ratio and volumes of up to 410ml. It has two vertical round chambers: the outer (also known as “doughnut”) chamber contains Part “A” and the inner chamber contains part “B”. The system requires a dedicated applicator tool that is capable of pushing pistons of both chambers at the same time.
Other sizes:
150ml, 380ml, 410ml
Applicator:
150ml - standard mastic gun.
Back
Suggested Accessories
Aplicator Dispenser 300ml
Hybrid - Hole Cleaning Brushes