EASF-V

EASF-V is a universal high performance bonded anchoring system suitable for use in cracked and uncracked concrete under normal and seismic conditions (category C1), and in masonry.

It is available in three gel & cure speed options:

  • EASF-V (standard grade) – normal gel / normal cure time
  • EASF-VE (tropical grade) – slow gel / fast cure time
  • EASF-VC (winter grade) – fast gel / fast cure time

EASF-V holds a report for resistance to fire (F120) and for contact with potable water (NSF/ANSI 61 and WRAS)

Compare Products

Approvals

  • ETA according to EAD 33049-00-0601 (Option 1: Cracked & Uncracked Concrete)
  • Seismic C1
  • ETA according to EAD 330087-00-0601 (TR023: Rebar Connections)
  • ETA according to EAD 330076-00-0604 (Masonry)
  • Fire Tested F120 (Threaded Rod)
  • NSF/ANSI 61 (Potable Water Contact)
  • WRAS Material Approval (Potable Water Contact)
  • A+ French VOC (Emissions Class)
  • LEED Tested
Approval Information

Features

  • Anchors may be placed close to free edges
  • Suitable for dry, wet & flooded holes
  • Reduced drilling diameters i.e. M20 only requires a 22mm hole and M24 requires only a 26mm hole making it an economical injection system
  • Variable embedment depths, up to 20 times the bar diameter
  • Available in co-axial cartridges (380; 400; 410ml), side by side cartridges (345; 360; 825ml), and single piston foil pack cartridges (150; 165; 170; 300; 550; 850ml)
  • Ratio of 10:1

Typical Applications

  • Structural applications in cracked and non cracked concrete
  • Applications where seismic resistance is required
  • Reinforcing & starter bars
  • Suspended ventilation systems
  • Safety barriers
  • Machinery & heavy machinery
  • Rolling cranes

Cartridge Systems

EASF-V is available in CiC (foil pack), C-CN (co-axial), S-SN (side-by-side) and PLR cartridges

CIC 300ml

Size selected: 300ml

CiC (capsule in cartridge) system, invented and patented by 2K in late 1990’s, is one of the most popular dispensing systems in the world. It allows us to fill your two component products in a single-chamber cartridge, which can be used with the industry-standard single-component applicator tools.

Other sizes:
170ml, 300ml, 550ml, 850ml

Applicator:
May be used with standard mastic guns.

Back

Co-Axial 380ml

Size selected: 380ml

The Co-Axial cartridge system is available in 10:1 ratio and volumes of up to 410ml. It has two vertical round chambers: the outer (also known as “doughnut”) chamber contains Part “A” and the inner chamber contains part “B”. The system requires a dedicated applicator tool that is capable of pushing pistons of both chambers at the same time.

Other sizes:
150ml, 380ml, 410ml

Applicator:
Requires dedicated dispensing tool is required for the 380ml cartridge.

Back

Co-Axial 410ml

Size selected: 410ml

The Co-Axial cartridge system is available in 10:1 ratio and volumes of up to 410ml. It has two vertical round chambers: the outer (also known as “doughnut”) chamber contains Part “A” and the inner chamber contains part “B”. The system requires a dedicated applicator tool that is capable of pushing pistons of both chambers at the same time.

Other sizes:
150ml, 380ml, 410ml

Applicator:
Requires dedicated dispensing tool is required for the 410ml cartridge.

Back

Side-By-Side 345ml

Size selected: 345ml

The S-SN cartridges are available in 1:1, 2:1, 3:1 and 10:1 ratios and volumes of up to 1500ml. Chambers of each component are positioned externally and next to each other, requiring dedicated applicator tool for each cartridge size.

Other sizes:
345ml, 385ml, 400ml, 450ml, 585ml, 600ml, 825ml, 900ml, 1500ml

Applicator:
The 345ml cartridge sizes require dedicated dispensing tools.

Back

PLR 280ml

Size selected: 280ml

The PLR cartridge is a 280ml cartridge available in 10:1 ratio. Although co-axial in design the PLR can still be used in a single component applicator. This is made possible by a device positioned behind the piston of the cartridge, which cuts and separates the centre tube to provide a clear path for the applicator gun plunger.

Other sizes:
280ml

Applicator:
280ml requires a good quality, single-piston mastic gun.

Back

Side-By-Side 825ml

Size selected: 825ml

The S-SN cartridges are available in 1:1, 2:1, 3:1 and 10:1 ratios and volumes of up to 1500ml. Chambers of each component are positioned externally and next to each other, requiring dedicated applicator tool for each cartridge size.

Other sizes:
345ml, 385ml, 400ml, 450ml, 585ml, 600ml, 825ml, 900ml, 1500ml

Applicator:
825ml cartridge sizes require dedicated dispensing tools.

Back

CIC 150ml

Size selected: 150ml

CiC (capsule in cartridge) system, invented and patented by 2K in late 1990’s, is one of the most popular dispensing systems in the world. It allows us to fill your two component products in a single-chamber cartridge, which can be used with the industry-standard single-component applicator tools.

Other sizes:
150ml, 170ml, 300ml, 550ml, 850ml

Applicator:
May be used with standard mastic guns.

Back

CIC 170ml

Size selected: 170ml

CiC (capsule in cartridge) system, invented and patented by 2K in late 1990’s, is one of the most popular dispensing systems in the world. It allows us to fill your two component products in a single-chamber cartridge, which can be used with the industry-standard single-component applicator tools.

Other sizes:
150ml, 170ml, 300ml, 550ml, 850ml

Applicator:
May be used with standard mastic guns.

Back

CIC 550ml

Size selected: 550ml

CiC (capsule in cartridge) system, invented and patented by 2K in late 1990’s, is one of the most popular dispensing systems in the world. It allows us to fill your two component products in a single-chamber cartridge, which can be used with the industry-standard single-component applicator tools.

Other sizes:
170ml, 300ml, 550ml, 850ml

Applicator:
May be used with standard mastic guns.

Back

CIC 850ml

Size selected: 850ml

CiC (capsule in cartridge) system, invented and patented by 2K in late 1990’s, is one of the most popular dispensing systems in the world. It allows us to fill your two component products in a single chamber cartridge, which can be used with the industry-standard single-component applicator tools.

Other sizes:
170ml, 300ml, 550ml, 850ml

Applicator:
May be used with standard mastic guns.

Back

Co-Axial 150ml

Size selected: 150ml

The Co-Axial cartridge system is available in 10:1 ratio and volumes of up to 410ml. It has two vertical round chambers: the outer (also known as “doughnut”) chamber contains Part “A” and the inner chamber contains part “B”. The system requires a dedicated applicator tool that is capable of pushing pistons of both chambers at the same time.

Other sizes:
150ml, 380ml, 410ml

Applicator:
150ml - standard mastic gun.

Back

Suggested Product Accessories

Suggested Accessories

Applicator Dispenser
Hybrid Hole Cleaning Brushes
Perforated Sleeves
Mixing Nozzles

Contact Us

Interested in our products and service? Click through to our contact form and one of our team will be in touch shortly.

Contact Us