EASF

EASF offers outstanding performance in concrete, masonry, and other substrates. It is ideally suited for high load/heavy duty structural anchoring applications of studs, threaded bars, starter bars and dowels.

Being free of styrene, our EASF formulation has a very low odour and is well suited for use indoors and in confined spaces. It has a very low VOC content.

EASF has undergone extensive testing. It is CE Marked and has been accredited with ETA Assessments for use with stainless and galvanized steel anchors (Option 7 ETA), and for post-installed rebar connections (ETA according to TR023) and for masonry units (ETA according to ETAG029). EASF is the perfect solution for all your heavy-duty applications in uncracked concrete. It has also been fire tested and has received fire resistance classification F120 (for use with threaded bars) & F240 (for use with rebars). For those operating in markets where American building codes are recognized, EASF can offer Evaluation Service Report from IAPMO.

EASF is available in CiC (foil pack), C-CN (co-axial), S-SN (side-by-side) and PLR cartridges.

Compare Products

Approvals

  • ETA according to EAD 330499-00-0601 (Option 7: Uncracked Concrete)
  • ETA according to EAD 330087-00-0601 (TR023: Rebar Connections)
  • ETA ETAG029
  • IAPMO according to AC308
  • Fire Tested F120 (Threaded Rod)
  • Fire Resistance report F240 (post installed rebar connections)
  • A+ French VOC (Emissions Class)
  • NSF/ANSI 61 (Potable Water Contact)
Approval Information

Features

  • Approved in concrete for threaded bars & reinforcing bars
  • Approved in masonry for threaded bars and sockets
  • Fire tested
  • Anchors may be placed close to free edges
  • Non-Sag formulation, ideal for overhead applications
  • Available in co-axial cartridges (380; 400; 410ml), side by side cartridges (345; 360; 825ml), PLR cartridges (280ml)
  • Ratio of 10:1
  • Reduced edges and spacing distance values in case of concrete splitting failure mode, allowing anchoring in critical cases.
  • Suitable for dry & wet holes
  • Variable embedment depths
  • Solvent free
  • Smell free

Typical Applications

  • Structural applications
  • Reinforcing & starter bars
  • Suspended ventilation systems
  • Safety barriers
  • Machinery & heavy machinery
  • Rolling cranes
  • Structural steel to concrete applications

Cartridge Systems

EASF is available in CiC (foil pack), C-CN (co-axial), S-SN (side-by-side) and PLR cartridges

CIC 300ml

Size selected: 300ml

CiC (capsule in cartridge) system, invented and patented by 2K in late 1990’s, is one of the most popular dispensing systems in the world. It allows us to fill your two component products in a single-chamber cartridge, which can be used with the industry-standard single-component applicator tools.

Other sizes:
170ml, 300ml, 550ml, 850ml

Applicator:
May be used with standard mastic guns.

Back

Co-Axial 380ml

Size selected: 380ml

The Co-Axial cartridge system is available in 10:1 ratio and volumes of up to 410ml. It has two vertical round chambers: the outer (also known as “doughnut”) chamber contains Part “A” and the inner chamber contains part “B”. The system requires a dedicated applicator tool that is capable of pushing pistons of both chambers at the same time.

Other sizes:
150ml, 380ml, 410ml

Applicator:
Requires dedicated dispensing tool is required for the 380ml cartridge.

Back

Co-Axial 410ml

Size selected: 410ml

The Co-Axial cartridge system is available in 10:1 ratio and volumes of up to 410ml. It has two vertical round chambers: the outer (also known as “doughnut”) chamber contains Part “A” and the inner chamber contains part “B”. The system requires a dedicated applicator tool that is capable of pushing pistons of both chambers at the same time.

Other sizes:
150ml, 380ml, 410ml

Applicator:
Requires dedicated dispensing tool is required for the 410ml cartridge.

Back

PLR 280ml

Size selected: 280ml

The PLR cartridge is a 280ml cartridge available in 10:1 ratio. Although co-axial in design the PLR can still be used in a single component applicator. This is made possible by a device positioned behind the piston of the cartridge, which cuts and separates the centre tube to provide a clear path for the applicator gun plunger.

Other sizes:
280ml

Applicator:
280ml requires a good quality, single-piston mastic gun.

Back

CIC 150ml

Size selected: 150ml

CiC (capsule in cartridge) system, invented and patented by 2K in late 1990’s, is one of the most popular dispensing systems in the world. It allows us to fill your two component products in a single-chamber cartridge, which can be used with the industry-standard single-component applicator tools.

Other sizes:
150ml, 170ml, 300ml, 550ml, 850ml

Applicator:
May be used with standard mastic guns.

Back

CIC 170ml

Size selected: 170ml

CiC (capsule in cartridge) system, invented and patented by 2K in late 1990’s, is one of the most popular dispensing systems in the world. It allows us to fill your two component products in a single-chamber cartridge, which can be used with the industry-standard single-component applicator tools.

Other sizes:
150ml, 170ml, 300ml, 550ml, 850ml

Applicator:
May be used with standard mastic guns.

Back

CIC 550ml

Size selected: 550ml

CiC (capsule in cartridge) system, invented and patented by 2K in late 1990’s, is one of the most popular dispensing systems in the world. It allows us to fill your two component products in a single-chamber cartridge, which can be used with the industry-standard single-component applicator tools.

Other sizes:
170ml, 300ml, 550ml, 850ml

Applicator:
May be used with standard mastic guns.

Back

CIC 850ml

Size selected: 850ml

CiC (capsule in cartridge) system, invented and patented by 2K in late 1990’s, is one of the most popular dispensing systems in the world. It allows us to fill your two component products in a single chamber cartridge, which can be used with the industry-standard single-component applicator tools.

Other sizes:
170ml, 300ml, 550ml, 850ml

Applicator:
May be used with standard mastic guns.

Back

Co-Axial 150ml

Size selected: 150ml

The Co-Axial cartridge system is available in 10:1 ratio and volumes of up to 410ml. It has two vertical round chambers: the outer (also known as “doughnut”) chamber contains Part “A” and the inner chamber contains part “B”. The system requires a dedicated applicator tool that is capable of pushing pistons of both chambers at the same time.

Other sizes:
150ml, 380ml, 410ml

Applicator:
150ml - standard mastic gun.

Back

Side-By-Side 825ml

Size selected: 825ml

The S-SN cartridges are available in 1:1, 2:1, 3:1 and 10:1 ratios and volumes of up to 1500ml. Chambers of each component are positioned externally and next to each other, requiring dedicated applicator tool for each cartridge size.

Other sizes:
345ml, 385ml, 400ml, 450ml, 585ml, 600ml, 825ml, 900ml, 1500ml

Applicator:
825ml cartridge sizes require dedicated dispensing tools.

Back

Side-By-Side 345ml

Size selected: 345ml

The S-SN cartridges are available in 1:1, 2:1, 3:1 and 10:1 ratios and volumes of up to 1500ml. Chambers of each component are positioned externally and next to each other, requiring dedicated applicator tool for each cartridge size.

Other sizes:
345ml, 385ml, 400ml, 450ml, 585ml, 600ml, 825ml, 900ml, 1500ml

Applicator:
The 345ml cartridge sizes require dedicated dispensing tools.

Back

Suggested Product Accessories

Suggested Accessories

Applicator Dispenser
Hybrid Hole Cleaning Brushes
Perforated Sleeves
Mixing Nozzles

Contact Us

Interested in our products and service? Click through to our contact form and one of our team will be in touch shortly.

Contact Us