P

Polyester is a high performance general purpose two-component chemical anchoring system that has been formulated for anchoring in a wide variety of building materials.

To match your installation environment, P is available in two gel/cure times, which includes slow for high-temperature environments, and standard. Furthermore, the resin is available in grey, stone (beige), and white colours. All features combined make Polyester anchoring resin a versatile and cost effective anchoring system.

The resin is CE Marked and has an Option 7 European Technical Assessment for anchoring into uncracked concrete.

P is available in CiC (foil pack), C-CN (co-axial) and S-SN (side-by-side) cartridges.

Compare Products

Approvals

  • ETA according to EAD 330499-00-0601 (Option 7: Uncracked Concrete)
  • A+ French VOC (Emissions Class)
  • LEED Tested
Approval Information

Features

  • Anchors may be placed close to free edges.
  • Ideal for overhead applications
  • Suitable for dry, wet & flooded holes without loss of performance
  • Reduced drilling diameters i.e. M20 only requires a 22mm hole and M24 requires only a 26mm hole making it an economical injection system.
  • Variable embedment depths
  • Available in co-axial cartridges (150; 380; 400; 410ml), side by side cartridges (345; 360; 825ml), and single piston foil pack cartridges (150; 165; 170; 300; 550; 850ml)
  • Ratio of 10:1
  • Available in grey, stone and white resulting colours

Typical Applications

  • Masonry Supports
  • Boilers
  • Machinery
  • Canopies
  • Hand Rails
  • Ventilated Façades
  • Bicycle Racks

Cartridge Systems

P is available in CiC(foil pack), C-CN (co-axial) and S-SN (side-by-side) cartridges.

CIC 300ml

Size selected: 300ml

CiC (capsule in cartridge) system, invented and patented by 2K in late 1990’s, is one of the most popular dispensing systems in the world. It allows us to fill your two component products in a single-chamber cartridge, which can be used with the industry-standard single-component applicator tools.

Other sizes:
170ml, 300ml, 550ml, 850ml

Applicator:
May be used with standard mastic guns.

Back

Co-Axial 380ml

Size selected: 380ml

The Co-Axial cartridge system is available in 10:1 ratio and volumes of up to 410ml. It has two vertical round chambers: the outer (also known as “doughnut”) chamber contains Part “A” and the inner chamber contains part “B”. The system requires a dedicated applicator tool that is capable of pushing pistons of both chambers at the same time.

Other sizes:
150ml, 380ml, 410ml

Applicator:
Requires dedicated dispensing tool is required for the 380ml cartridge.

Back

Co-Axial 410ml

Size selected: 410ml

The Co-Axial cartridge system is available in 10:1 ratio and volumes of up to 410ml. It has two vertical round chambers: the outer (also known as “doughnut”) chamber contains Part “A” and the inner chamber contains part “B”. The system requires a dedicated applicator tool that is capable of pushing pistons of both chambers at the same time.

Other sizes:
150ml, 380ml, 410ml

Applicator:
Requires dedicated dispensing tool is required for the 410ml cartridge.

Back

Side-By-Side 345ml

Size selected: 345ml

The S-SN cartridges are available in 1:1, 2:1, 3:1 and 10:1 ratios and volumes of up to 1500ml. Chambers of each component are positioned externally and next to each other, requiring dedicated applicator tool for each cartridge size.

Other sizes:
345ml, 385ml, 400ml, 450ml, 585ml, 600ml, 825ml, 900ml, 1500ml

Applicator:
The 345ml cartridge sizes require dedicated dispensing tools.

Back

CIC 150ml

Size selected: 150ml

CiC (capsule in cartridge) system, invented and patented by 2K in late 1990’s, is one of the most popular dispensing systems in the world. It allows us to fill your two component products in a single-chamber cartridge, which can be used with the industry-standard single-component applicator tools.

Other sizes:
150ml, 170ml, 300ml, 550ml, 850ml

Applicator:
May be used with standard mastic guns.

Back

CIC 170ml

Size selected: 170ml

CiC (capsule in cartridge) system, invented and patented by 2K in late 1990’s, is one of the most popular dispensing systems in the world. It allows us to fill your two component products in a single-chamber cartridge, which can be used with the industry-standard single-component applicator tools.

Other sizes:
150ml, 170ml, 300ml, 550ml, 850ml

Applicator:
May be used with standard mastic guns.

Back

CIC 550ml

Size selected: 550ml

CiC (capsule in cartridge) system, invented and patented by 2K in late 1990’s, is one of the most popular dispensing systems in the world. It allows us to fill your two component products in a single-chamber cartridge, which can be used with the industry-standard single-component applicator tools.

Other sizes:
170ml, 300ml, 550ml, 850ml

Applicator:
May be used with standard mastic guns.

Back

CIC 850ml

Size selected: 850ml

CiC (capsule in cartridge) system, invented and patented by 2K in late 1990’s, is one of the most popular dispensing systems in the world. It allows us to fill your two component products in a single chamber cartridge, which can be used with the industry-standard single-component applicator tools.

Other sizes:
170ml, 300ml, 550ml, 850ml

Applicator:
May be used with standard mastic guns.

Back

Co-Axial 150ml

Size selected: 150ml

The Co-Axial cartridge system is available in 10:1 ratio and volumes of up to 410ml. It has two vertical round chambers: the outer (also known as “doughnut”) chamber contains Part “A” and the inner chamber contains part “B”. The system requires a dedicated applicator tool that is capable of pushing pistons of both chambers at the same time.

Other sizes:
150ml, 380ml, 410ml

Applicator:
150ml - standard mastic gun.

Back

Suggested Product Accessories

Suggested Accessories

Applicator Dispensers
RW Mixing Nozzles
Perforated Sleeves
Hole Cleaning Pump
Hybrid - Hole Cleaning Brushes

Contact Us

Interested in our products and service? Click through to our contact form and one of our team will be in touch shortly.

Contact Us