PSF
PSF is an odourless anchoring adhesive. We have formulated PSF to provide medium load performance. Users can install this mortar in uncracked concrete and masonry units.
Formulated free of styrene, PSF is the product of choice for use in confined spaces and indoors. A must-have for DIYers
PSF is ETA approved (ETA Option 7) for shallow and very deep applications (4d to 20d).
The ETA includes a wide range of threaded rods (M8-M24) and rebars used as anchors (T8-T25)
PSF is available in three gel & cure speed options:
- PSF – standard grade, normal gel / normal cure time
- PSF-C – fast gel and fast cure time for cold-temperature environments
- PSF-E – slow gel and fast cure time for high-temperature environments (extended gel time / tropical grade)
PSF is available in CiC (foil pack), C-CN (co-axial), S-SN (side-by-side).
Approvals
- ETA according to EAD 330499-00-0601 (Option 7: Uncracked Concrete)
- A+ French VOC (Emissions Class)
- LEED Tested
Features
- No odour
- Suitable for use with close edge distance and small anchor spacings.
- High productivity: Gel and cure times are not affected by the presence of humidity in the drilled holes
- Installation in dry, wet & flooded holes
- Convenient: non-sag thixotropic formulation for overhead applications without specific accessories
- Economical: reduced drilling diameters, 22mm for M20 and 26mm for M24; result in significant material and labour savings.
- Flexible: variable embedment depths 4d to 20d
- Available in co-axial cartridges (380; 400; 410; 420ml), side by side cartridges (345; 350; 360; 825ml) and single piston foil pack cartridges (150; 170; 300; 410; 550; 850ml)
- Ratio of 10:1
- Available in grey and stone (beige) resulting colours
- Available in new fading blue formulation (grey resulting colour)
Typical Applications
- Canopies
- Ventilation Systems
- Railings
- Bicycle Racks
- Balcony Fences
- Hand Rails
- Machinery
Cartridge Systems
PSF is available in CiC (foil pack), C-CN (co-axial) and S-SN (side-by-side) cartridges.
CIC 300ml
Size selected: 300ml
CiC (capsule in cartridge) system, invented and patented by 2K in late 1990’s, is one of the most popular dispensing systems in the world. It allows us to fill your two component products in a single-chamber cartridge, which can be used with the industry-standard single-component applicator tools.
Other sizes:
170ml, 300ml, 550ml, 850ml
Applicator:
May be used with standard mastic guns.
Co-Axial 380ml
Size selected: 380ml
The Co-Axial cartridge system is available in 10:1 ratio and volumes of up to 410ml. It has two vertical round chambers: the outer (also known as “doughnut”) chamber contains Part “A” and the inner chamber contains part “B”. The system requires a dedicated applicator tool that is capable of pushing pistons of both chambers at the same time.
Other sizes:
150ml, 380ml, 410ml
Applicator:
Requires dedicated dispensing tool is required for the 380ml cartridge.
Co-Axial 410ml
Size selected: 410ml
The Co-Axial cartridge system is available in 10:1 ratio and volumes of up to 410ml. It has two vertical round chambers: the outer (also known as “doughnut”) chamber contains Part “A” and the inner chamber contains part “B”. The system requires a dedicated applicator tool that is capable of pushing pistons of both chambers at the same time.
Other sizes:
150ml, 380ml, 410ml
Applicator:
Requires dedicated dispensing tool is required for the 410ml cartridge.
Side-By-Side 345ml
Size selected: 345ml
The S-SN cartridges are available in 1:1, 2:1, 3:1 and 10:1 ratios and volumes of up to 1500ml. Chambers of each component are positioned externally and next to each other, requiring dedicated applicator tool for each cartridge size.
Other sizes:
345ml, 385ml, 400ml, 450ml, 585ml, 600ml, 825ml, 900ml, 1500ml
Applicator:
The 345ml cartridge sizes require dedicated dispensing tools.
CIC 150ml
Size selected: 150ml
CiC (capsule in cartridge) system, invented and patented by 2K in late 1990’s, is one of the most popular dispensing systems in the world. It allows us to fill your two component products in a single-chamber cartridge, which can be used with the industry-standard single-component applicator tools.
Other sizes:
150ml, 170ml, 300ml, 550ml, 850ml
Applicator:
May be used with standard mastic guns.
CIC 170ml
Size selected: 170ml
CiC (capsule in cartridge) system, invented and patented by 2K in late 1990’s, is one of the most popular dispensing systems in the world. It allows us to fill your two component products in a single-chamber cartridge, which can be used with the industry-standard single-component applicator tools.
Other sizes:
150ml, 170ml, 300ml, 550ml, 850ml
Applicator:
May be used with standard mastic guns.
CIC 550ml
Size selected: 550ml
CiC (capsule in cartridge) system, invented and patented by 2K in late 1990’s, is one of the most popular dispensing systems in the world. It allows us to fill your two component products in a single-chamber cartridge, which can be used with the industry-standard single-component applicator tools.
Other sizes:
170ml, 300ml, 550ml, 850ml
Applicator:
May be used with standard mastic guns.
CIC 850ml
Size selected: 850ml
CiC (capsule in cartridge) system, invented and patented by 2K in late 1990’s, is one of the most popular dispensing systems in the world. It allows us to fill your two component products in a single chamber cartridge, which can be used with the industry-standard single-component applicator tools.
Other sizes:
170ml, 300ml, 550ml, 850ml
Applicator:
May be used with standard mastic guns.
Co-Axial 150ml
Size selected: 150ml
The Co-Axial cartridge system is available in 10:1 ratio and volumes of up to 410ml. It has two vertical round chambers: the outer (also known as “doughnut”) chamber contains Part “A” and the inner chamber contains part “B”. The system requires a dedicated applicator tool that is capable of pushing pistons of both chambers at the same time.
Other sizes:
150ml, 380ml, 410ml
Applicator:
150ml - standard mastic gun.
Suggested Accessories
Applicator Dispenser
Hybrid Hole Cleaning Brushes
Perforated Sleeves
Mixing Nozzles
Contact Us
Interested in our products and service? Click through to our contact form and one of our team will be in touch shortly.
Contact Us